|
 |
| | |  | | 
| | Tanabe Sustec Stabilizer 240sx 89-98
Full Chromemoly Construction, Handling Master
Chromemoly is extremely lightweight and rigid, when compared to heavier standard steel, which requires more material to acheive the same amount of strength. Chromemoly steel is commonly used to build roll cages, and has an established reputation in the performance community as a choice material for a reasonable price. Sustec Stabilizer is extremely lightweight, and is engineered to provide the favored neutral balance, which can eliminate factory suspension settings for understeer.
Bolt On, Stock Mounting
The Sustec Stabilizer bolts onto stock mounting locations and uses the factory endlinks and fitment for trouble free useage. Many other swaybars need special hardware that can change mounting location, and can interfere with fitment and clearance with other components on the vehicle, such as the exhaust, or suspension arms if the vehicle is aggressively lowered.
No Adjustment Necessary
The Sustec Stabilizer has ideal fitment, and is specially tuned to provide the best handling characteristics for each vehicle, reducing the need for adjustments. Anti-swaybars that have 'notches' on the swaybar mount, can exhibit a tendency to bend and snap factory endlinks after minimal use, therefore, if adjustment is absolutely necessary, reinforced adjustable endlinks are recommended for preload adjustment.
Solid Bushings Included on Most Kits
Most Sustec Stabilizer kits include replacement bushings that will accomodate for the specially sized Sustec Stabilizer .
240sx s13 1989-1994M
Front: 30.4 MM
Rear: 22.0 MM
240sx s14 1995-1998
Front: 30.4 MM
Rear: 27.5 MM
| |
|
|
|
| |
|
|
