|
 |
| | |  | | 
| | Stillen Stage 2 Intercooler Supercharger Kit G35
STILLEN G35 Stage 2 Intercooled Blower Description and Specs. NOW SHIPPING!!!
The only G35 Coupe forced induction kit that is 50 state legal - CARB certified!
The only G35 Coupe forced induction kit that can offer an engine warranty!
Our new superchargers for the 350Z and G35 are based on an Eaton positive displacement twin rotor unit. We chose this type because of its track record of performance and reliability. This is the same unit employed by O.E. Manufacturers such as: Jaguar, Mercedes Benz and others. It is also the basis for kits by Jackson Racing, TRD, Rousch and others. This has been designed as a modification that will be reliable, long lived and satisfying in daily use. The twin screw design provides greatly increased low end power when compared to centrifugal superchargers.
Before offering this kit for sale, we put 10 intensive months of design, testing, dyno time and day to day driving into it. The kit has been tested over thousands of miles in all driving conditions. We continued to refine it making improvements in operating efficiency, installation and compatibility with existing systems.
Our intercooled stage 2 kit has earned CARB certification and is 50 state legal. By dramatically reducing the intake charge temperature, the intercooler provides more power and more consistent availability of power in high load and high ambient temperature operating conditions. The stage 1 kit can be upgraded to stage 2 specs and 50 state legal status via the addition of the Stillen intercooler kit.
In Stage 2 trim, the unit produces approximately 70 horsepower to the wheels and upwards of that at the flywheel. This power is delivered in a smooth, linear fashion from idle through redline. We are rating this unit at an average of 371 hp @6000 rpm and 346 ft/lbs at 4200 rpm. The average install time for a stage 2 blower is approximately 15-16 hours for a certified mechanic with experience in this type of installation. This Supercharger kit requires that you replace the stock spark plugs with plugs that are 1 heat range colder (see part # NGK7654).
We have received approval from Dell Financial Group to offer their extended warranty. This will allow limited coverage of the engine for 3 years or 36,000 miles as an additional cost option. This approval was granted after extensive review of our engineering designs and independent testing of the unit.
We have received approval from Dell Financial Group to offer their extended warranty. This will allow limited coverage of the engine for 3 years or 36,000 miles as an additional cost option. This approval was granted after extensive review of our engineering designs and independent testing of the unit.
We have worked hard to produce a kit that is state of the art in every way. We have invested in new testing equipment, personnel and tooling. We have produced a kit that is OE level quality or better.
The unit requires additional clearance under the hood for the supercharger. We have 5 options to accomplish this. They are as follows:
1. Replacement fiberglass hood. (This is supplied ready for final prep and painting.) Requires truck LTL shipping.
2. Replacement carbon fiber hood. (Requires no painting.) Requires truck LTL shipping.
3. Fiberglass Cowl. Requires a cut out of the stock hood. Supplied ready for prep and painting. Ships by UPS or FedEx.
4. Matte finish carbon fiber cowl. Not as highly prepped or as consistently finished as the Gloss finish unit. Ships by UPS or FedEx.
5. Gloss finish carbon fiber cowl. Adds high gloss finish and cosmetic prep to the Matte finish unit. Ships by UPS or FedEx.
| |
|
|
|
| |
|
|
